MATT HARDENER TP68

MATT HARDENE TP68 is used for pure epoxy resin , epoxy\ polyester hybrid powder coatings to achieve coatings with matt surface

Matt Hardener (TP68)

1.Specification

Appearance:Fine white powder

Purity:≥99%

Melting range:200-225°C

2.Application MATT HARDENE TP68 is used for pure epoxy resin , epoxy\ polyester hybridpowder coatings to achieve coatings with matt surface having excellent mechanicquality and wonderful appearance.

3.Application reference formula

Curing condition: 180°C20-25 minutes 190°C10-12 minutes 200°C8-10 minutes

4.Notice MATTHARDENER compatibility with resin isn’twell for its high melting point, to avoid this default it’s necessary todistribute them or to make the curing temperature at a higher level.In case ofepoxy\polyester hybrid powder coatings, the polyester should be low acidity.Before achieving the ideal gloss and multiple characteristics tests are needed.

5.Storage:The storageperiod could last a rather long time when it is kept inside the sealedcontainer. Do seal the container again after taking some from it.

MATT HARDENER TP68